Optimum Gloss-Coat

  • Sale
  • $58.99
  • Regular price $64.99


Optimum Gloss-Coat is an advanced polymer system that forms a clear coat like layer of protection to your paint! Formulated by the great Dr. G, Gloss-Coat is similar to the clear coat that already exists on your vehicle. The difference is, this coating forms a shell of protection that is glossier, slicker, and less prone to wash-induced swirl marks and marring. Gloss-Coat adds an amazing level of gloss and depth to the paint that will have rain forming tight little beads and rolling off the surface! Once the surface is protected with Gloss-Coat it will be considerably easier to clean and maintain compared to conventional waxes and sealants. Gloss-Coat is not recommended for application on glass, however it works great on your paint, wheels, plastic trim, bumpers, aluminum and chrome. For application tips take a look at the complete breakdown below. Gloss-Coat is all you need to protect your paint but if you like more shine and protection feel free to top it with your favorite sealant and/or wax! If you are looking for a great protective coating for your car the Optimum Gloss-Coat is a great choice!

Application Directions:
Polish the paint to remove any defects before applying the Gloss-Coat
Clean surface with 15% IPA solution to remove all polishing oils, waxes, and silicones
Prime the Optimum Opti-Dual Pro Applicator by making an X pattern across the pad. Only a few drops will be needed for each subsequent panel
Wipe Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction
Within 5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear
Use foam applicator or paint safe microfiber to even out any areas where you see streaks. This step is key, as any spots not leveled will have to be polished if allowed to cure. Panels will feel a bit tacky and will be self-leveling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results
Repeat steps 1-6 for each panel where application is desired