The new Meguiar's DA Microfiber Finishing Wax is an outstanding AIO (All In One) product that can polish and protect in one step. Unlike many other AIO products this product offers serious corrective power that safely removes very light surface imperfections with ease. At the same time it's leaving behind a coating of wax that will protect the paint from nature's harshest elements and enhance the finishes appearance. The Meguiar's DA Microfiber Finishing Wax should be used exclusively with the Meguiar's DA Microfiber Finishing Disc Buffing Pad and a dual action buffer like Porter Cable 7424 XP. The entire system was designed to work with these three components together so it's critical you have all three. Meguiar's also highly recommends using their backing plates because they have a shorter loop on their model (Meguiar's Professional Backing Plate W67DA 5" or S6BP 6"). This helps reduce the amount of heat generated, which in turn preserves the life of the pad. When you apply the product you need to prime the pad thoroughly by applying the finishing wax all over the pad. If any areas look dry manually spread the product with a clean hand so the entire pad has little bit of product covering it. From then on you only need about two to four small drops for each 2ft x 2ft section. Use the buffer at speeds 3 - 4 with light to medium pressure for optimal results and you'll quickly see the surface imperfections fade and a vibrant shine appear. The shine looks incredible and you'll be happy to know the paint is protected. If you want to remove slightly deeper surface imperfections we recommend using the Meguiar's DA Microfiber Correction Compound before hand.