EXEDY Stage 3 Hyper Single (Pull Type) Cerametallic Clutch Kit (Flywheel Included), for Acura NSX 91-05
Note 1: Can handle up to 238ft/lbs WTQ.
Note 2: Flywheel crank bolts required (Honda part #90011-PR7-000 8pcs), input shaft must be changed on transmission to 91-96 model if used in 1997-05 models.
Stage 3 Hyper Single
The Hyper Single Clutch is engineered to optimize the performance of cars that are moderately modified, but do not require the clutch capacity of a multi-plate clutch. Similar to their multi-plate clutches, it has a purple anodized, forged aluminum cover. The aluminum cover is stiffer than a stamped cover and therefore allows a higher lever ratio to maintain the pedal efforts at a reasonable level. There is no clamp load deflection as found in a pressed metal type cover.
All Hyper Single clutches come with a chromoly steel flywheel, 6-puck cerametallic facing and a spring center damper disc assembly. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting and less wear and tear on the transmission synchros. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and generally higher than other single plate clutches. An additional feature of the pressure plate is a series of turbine-like, air flow enhancing vanes that keep the clutch cooler under extreme operating conditions to improve wear life.