BMI Accessories Polishing Pal

  • Sale
  • $17.99
  • Regular price $19.99

If you are tired of looking at swirls even after polishing it's time to step up and grab the premium rotary buffer on the market. The Makita 9237C-X3 is an outstanding buffer that has the power to remove very deep imperfections in your paint or jewel your paint to a new level of gloss and depth. Orbital and dual action buffers don't have nearly the power this buffer has to really work in a polish and get the absolute maximum cutting power and best possible finish. With the Makita 9237C-X3 you can work in a polish significantly faster while achieving better results than an orbital or DA buffer. This is possible because it's a rotary buffer that spins continuously in one direction instead of just oscillating.
With any rotary buffer you should do some research on how to properly operate a rotary and put in some time practicing at low speeds before performing your first detail. With a skilled operator, you can completely restore the oldest and most faded clear coats to look like new!
The Makita 9237C-X3 comes with several extras that help add even more value to this purchase. It comes with the Makita 9237C-X3 which is a complete buffer with the 6.5" hook and loop backing plate included. This backing plate allows you to easily swap on and off other 6.5" pads or larger pads. It also includes the Wool Compound Pad and a Blended Polishing Pad. These specific pads are very aggressive cutting pads so we recommend you also get some of the Lake Country foam polishing pads. It comes with a hex wrench as well that allows you to change out the two handles. You can also purchase separately the 3.5" Lake Country Hook and Loop Backing Plate with the 4" Lake Country Polishing Pads. The 4" pads are a little easier and safer to use because they have less cutting power compared to the larger pads. The matching carrying case is very convenient and that allows you keep all your products in one bag specifically designed for this unit.

A large part of the reason this buffer is so highly regarded is because each part of it was built to achieve the best results possible and last for years and years! This buffer has a 10 amp motor that will not bog down, so it delivers smooth and reliable power no matter the task. It's even powerful enough to use for really tough grinding tasks if desired. It weighs 6.6lbs so it's pretty light and easy to maneuver for just about anyone. It comes with a side handle and a hoop handle that makes it very easy to control and operate for you at virtually every panel during the process. To adjust the speed we recommend you set the speed dial (1 - 6) to the desired speed (see chart below). If you set the speed to 2 then the buffer will not go above 900 RPMs. However there is a variable speed trigger, which you squeeze to turn the buffer on and start spinning. If you squeeze this trigger lightly it will start off at a lower speed and if you squeeze it all the way it will reach 900 RPMs. It also has switch that allows you to lock in the trigger so you don't have to worry about holding the it at one constant speed. This feature allows you to keep your hand off the trigger and remain focused on working in the product.