22ple VX3 Signature Glass Coating - 50 ml

  • Sale
  • $104.99
  • Regular price $119.99

If you are tired of applying sealants and waxes that last a few months, the 22ple VX3 is the perfect solution. The 22ple VX3 Signature Glass Coating achieves an amazing level of gloss and protection, similar to the 22ple VX Pro, but comes at a much lower price point. This is the perfect coating product to start on and see exactly what 22ple glass coatings are all about! With a durability of two years, as well as the signature 22ple ease of use what is not to like? Did I also mention the famous gloss as well as superior chemical resistance and ease of maintenance? The VX3 provides you everything so your paint is protected year round and looking great! VX3 has a hardness of 7H, ideal hardness for paint coating, but features less silica than the VX Pro or VX Pro2. This allowed 22ple to offer a great coating at a lower price point that everyone can enjoy! If you are looking for maximum protection, the VX Pro or the VX Pro2 are a great choice. What are you waiting for!? With the great value of the 22ple VX3 Signature Glass Coating you have no excuses not to see what a great glass coating is all about!

Please Note: 22ple Glass Coat Applicator (Double Sided) sold separately.

Sizing Recommendations:
30ml - Best size for single vehicle applications. With some experience with the product you can get two or more applications out of this size.
50ml - Best value and if you are looking to perform multiple applications.
22ple Application Instructions:
Ensure the surface is cleaned & polished.
Remove all oil/polishes on the surface by doing an IPA (Isopropyl Alcohol) wipe down. Use a mixture of 50% Isopropyl Alcohol with 50% distilled water.
Please make sure the surface is cool and TOTALLY dry before applying the glass coat.
Pour a small amount of glass coat liquid onto the 22ple Glass Coat Applicator (Double Sided) and apply in a straight line motion. Do not over-apply as it does not give you additional benefit, but it might make it difficult to remove.
Make sure ALL surfaces are covered. You should then buff off the coating with a clean, lint-free microfiber towel within 5-7 minutes in normal room temperature. Should you encounter any dried coating, simply re-apply another layer over it and buff. If an area becomes dry / tacky, then it's a sign that you allowed it to sit on the surface too long. We like to use 2 towels for removal. The first for main product removal, and then immediately go over it again with the second towel to ensure that you have completely removed all residue. As a good rule of thumb, apply 22ple to just 2 panels / sections at a time, and then proceed with residue removal. If you extend any more than this, the coating will dry too much and can become tacky.
Increase dwell time if working in colder temperatures, decrease when working in higher humidity accordingly.
Cure time - Do not wash your car or expose the car to open weather element,rain, snow etc for around 8-12 hours.
After this initial curing time, the car can be washed or driven per normal.
The full curing time is about 5 days, at which time the full layer of the coat will be hardened and the surface will look its best.
Do not reuse any applicator pads used to apply this coating. 22ple will dry and harden these applicator pads and if used again they could potentially mar the paint.