If you are looking to apply an extremely strong protective coating that will leave an incredible layer of gloss simultaneously then the 22ple VX Pro Glass Coating is for you. This product is a truly unique form of protection that is unlike traditional sealants or waxes but applies just as easy. VX Pro will leave behind a hardened high silica-content glass barrier between your paint and harmful environmental elements. It protects the surface in a unique way so contamination will not readily stick to the surface. Later on your wash mitt will glide across the paint with ease, removing the contamination safely and easily. Water will even bead and roll off the surface like never before, making the drying process faster and safer which reduces the risk of marring the paint! The protection is strong but also extremely durable making it far superior to traditional waxes and sealants. While sealants and waxes provide you with up to 6 months of protection, you can expect a whopping 18-24 months with VX Pro! If you're worried about the shine don't bother because it is a warm and deep gloss that commands your attention. Since you're literally applying a glass like coating to the surface you're getting that "hard candy" or "wet" appearance everyone loves. This coating will truly distinguish your vehicle from others and preserve it's value for years to come. If you are looking for a semi-permanent paint coating that makes the paint look better than new while offering durable protection then the 22ple VX Pro is for you!
VX Pro Glass Coating vs. 22ple VX Signature Glass Coating
Both coatings are very durable and look great. The Pro version was designed with a higher level of silica which provides a slightly higher level of gloss and protection.
Please Note: 22ple Glass Coat Applicator (Double Sided) sold separately.
Sizing Recommendations:
20ml - Great for single coats on average size cars, touch-ups or motorcycles.
30ml - Best size for single vehicle applications. With some experience with the product you can get multiple applications out of this size.
50ml - Best if you are looking to perform multiple applications or want to apply on multiple vehicles.
22ple Application Instructions:
Ensure the surface is cleaned & polished.
Remove all oil/polishes on the surface by doing an IPA (Isopropyl Alcohol) wipe down. Use a mixture of 50% Isopropyl Alcohol with 50% distilled water.
Please make sure the surfaces are cool and TOTALLY dry before applying the glass coat.
Pour a small amount of glass coat liquid onto the 22ple Glass Coat Applicator (Double Sided) and apply in a straight line motion. Do not over-apply as it does not give you additional benefit, but it might make it difficult to remove.
Make sure ALL surfaces are covered. You should then buff off the coating with a clean, lint-free microfiber towel within 3-5 minutes in normal room temperature. Should you encounter any dried coating, simply reapply another layer over it and buff. If an area becomes dry / tacky, then it's a sign that you allowed it to sit on the surface too long. We like to use 2 towels for removal. The first for main product removal, and then immediately go over it again with the second towel to ensure that you have completely removed all residue. As a good rule of thumb, apply 22ple to just 2 panels / sections at a time, and then proceed with residue removal. If you extend any more than this, the coating will dry too much and can become tacky.
Cure time - Do not wash your car or expose the car to open weather element,rain, snow etc for around 8-12 hours.
After this initial curing time, the car can be washed or driven per normal.
The full curing time is about 5 days, at which time the full layer of the coat will be hardened and the surface will look its best.
VX Pro Glass Coating vs. 22ple VX Signature Glass Coating
Both coatings are very durable and look great. The Pro version was designed with a higher level of silica which provides a slightly higher level of gloss and protection.
Please Note: 22ple Glass Coat Applicator (Double Sided) sold separately.
Sizing Recommendations:
20ml - Great for single coats on average size cars, touch-ups or motorcycles.
30ml - Best size for single vehicle applications. With some experience with the product you can get multiple applications out of this size.
50ml - Best if you are looking to perform multiple applications or want to apply on multiple vehicles.
22ple Application Instructions:
Ensure the surface is cleaned & polished.
Remove all oil/polishes on the surface by doing an IPA (Isopropyl Alcohol) wipe down. Use a mixture of 50% Isopropyl Alcohol with 50% distilled water.
Please make sure the surfaces are cool and TOTALLY dry before applying the glass coat.
Pour a small amount of glass coat liquid onto the 22ple Glass Coat Applicator (Double Sided) and apply in a straight line motion. Do not over-apply as it does not give you additional benefit, but it might make it difficult to remove.
Make sure ALL surfaces are covered. You should then buff off the coating with a clean, lint-free microfiber towel within 3-5 minutes in normal room temperature. Should you encounter any dried coating, simply reapply another layer over it and buff. If an area becomes dry / tacky, then it's a sign that you allowed it to sit on the surface too long. We like to use 2 towels for removal. The first for main product removal, and then immediately go over it again with the second towel to ensure that you have completely removed all residue. As a good rule of thumb, apply 22ple to just 2 panels / sections at a time, and then proceed with residue removal. If you extend any more than this, the coating will dry too much and can become tacky.
Cure time - Do not wash your car or expose the car to open weather element,rain, snow etc for around 8-12 hours.
After this initial curing time, the car can be washed or driven per normal.
The full curing time is about 5 days, at which time the full layer of the coat will be hardened and the surface will look its best.